Texture
- Standard
- Sand and float, which hides small waves in the base coat and patches well later.
- Premium
- Smooth trowel. Every wave shows in low sun, so the base is screeded flat first, and we quote it higher.
A four-storey Oakville residence in two-tone stucco over a stone base, photographed mid-job and read point by point below. The strip shows three other exteriors from our work.
One bay is still being finished, so the photo shows the layers a finished wall hides.
1
2
3
4
5
The materials are the same as on standard work; the difference is in how flat, how planned and how tested the wall is.
| Stucco or EIFS exterior, installed | $8–$16per sq ft |
|---|---|
| Full insulated EIFS system | $18–$28per sq ft |
| Architectural grade: screeded flat, mock-ups approved | $30–$40per sq ft |
These are our published GTA ranges; your fixed written price follows the free site visit. Cost calculator

Long smooth panels with minimal trim, where the reveal lines carry the design. Walls this smooth need a flat base coat and planned control joints.
See the project
Complete exterior finishing of a five-storey multi-unit building, one floor taller than the Oakville wall above. Work at this height runs from scaffold or lifts.
See the project
“Absolutely amazing work by Stucco Wall Systems! From the first consultation to the final result, everything was done professionally and with great attention to detail. The team clearly knows what they're doing — the finish looks clean, modern, and high-quality.”
Send drawings, or a photo of the wall, and we book a free site visit to measure it.
(905) 973-6470Not answered here? Call, or text a photo of your wall.
(905) 973-6470