
Modern EIFS installation, Toronto
Beige finish going onto a two-storey rear wall from full-height scaffolding.
See the project
A two-storey custom home in Toronto finished in smooth white stucco around black window frames. Book a free visit and you get one written price, fixed before work starts.
Four details read straight from the photo, taken before the lot was graded.
The material costs the same; the difference is how flat the wall underneath must be and how repairs show later.

| Point | Smooth trowel | Sand float |
|---|---|---|
| Base coat | Must be dead flat before the finish goes on | The grain hides small waves |
| Hairline cracks | Visible along their full length | Broken up by the texture |
| Repairs | Usually a whole panel, to a corner or joint | A patch can blend in |
| Dirt and rain | Sheds water and grime fastest | Holds a little more in the grain |
| Price | Upper half of the range, about 5–10% more | Lower half of the range |
Going dark over foam-backed EIFS? Manufacturers set a minimum light reflectance for those finishes, and we check your colour against it before ordering.
Smooth trowel lands in the upper half of the first band, because of the extra base-coat work.
“Absolutely amazing work by Stucco Wall Systems! From the first consultation to the final result, everything was done professionally and with great attention to detail. The team clearly knows what they're doing — the finish looks clean, modern, and high-quality. Highly recommend them to anyone looking to upgrade the exterior of their home. The results truly speak for themselves!”

Beige finish going onto a two-storey rear wall from full-height scaffolding.
See the project
Light grey acrylic finish with pilasters and arched ground-floor windows.
See the project
Taupe stucco with raised window surrounds above a stone base.
See the projectSend a daylight photo of the house or the architect's elevations, and we book a visit to measure.
(905) 973-6470