Hairline map cracking
CosmeticWhat you see: Fine web of cracks under 1 mm across a whole wall
What it means: Normal shrinkage or a finish coat applied too fast. Cosmetic, not structural.
Our repair: Skim & refinish
Cracks, hollow spots, water stains — we find what is actually causing it, repair it properly and match the texture and colour so the fix disappears. Free written quote, fixed price, across Oakville and the GTA.

Proper stucco repair cuts back to sound material, fixes the cause (failed flashing, missing mesh, trapped moisture), rebuilds insulation and base coat with new reinforcing mesh, then applies a finish coat tinted and textured to match the existing wall. Surface-only patches skip the diagnosis — which is why they reappear within a couple of winters.
Repair is diagnostic work first. A crack at a window corner, a soft spot under a sill, and a hairline web across a panel have three different causes and three different fixes — and one of them signals water in the wall that can’t wait. We repair all stucco types across the GTA: modern EIFS, acrylic systems and original hard-coat. Our Mississauga repair and restoration project shows the diagnosis-first process, and our post on how stucco repair works explains what to expect step by step. When damage is systemic rather than local, we’ll say so — see full exterior refinishing for that path.
| Symptom | Likely cause | Urgency |
|---|---|---|
| Diagonal cracks at window corners | Movement + missing corner mesh | Repair this season |
| Round impact holes | Hail, equipment, woodpeckers | Repair promptly — open foam invites more |
| Soft or bulging areas | Water trapped behind the system | Urgent — moisture testing first |
| Hairline web across panel | Aged finish, minor substrate movement | Recoat window — plan, don’t panic |
| Staining below windows | Failed sill sealant or flashing | Fix the joint before spring rains |
Repair-led projects showing matched finishes and rebuilt details.
More finished exteriors in the project portfolio and gallery.
Based in Oakville, working across the Greater Toronto Area. Pick your city for local details, pricing context and nearby projects:
Not every crack is a problem, and not every problem is a crack. Find yours below — then you will know whether to call us today or leave it until spring.
What you see: Fine web of cracks under 1 mm across a whole wall
What it means: Normal shrinkage or a finish coat applied too fast. Cosmetic, not structural.
Our repair: Skim & refinish
What you see: A clean line following a stud, joint or floor level
What it means: A missing or failed control joint — the wall has nowhere to move during freeze-thaw.
Our repair: Cut in a proper control joint, re-mesh, refinish
What you see: Cracks running at 45° off a window or door corner
What it means: Stress concentration with no diagonal mesh reinforcement at the opening.
Our repair: Open up, add corner mesh, rebuild base coat
What you see: Cracking that follows the mortar joints behind
What it means: Movement in the substrate itself — the stucco is only reporting it.
Our repair: Substrate assessed first; stucco repaired after
What you see: The wall sounds hollow when tapped, or flexes
What it means: Water is behind the system and has debonded it from the substrate.
Our repair: Remove to sound material, dry out, rebuild the assembly
What you see: Brown streaks or white powder below cracks and trims
What it means: Water is getting in and out — usually failed caulking or missing flashing.
Our repair: Trace the water path, flash and seal, then patch
Not sure which one you have? Text a photo to (905) 973-6470 and Musa will tell you straight — including when the honest answer is “leave it alone”.
Ranges we actually quote in 2026, before seeing your walls. Access, height and how much has to come off drive the final number — the written quote we give you is fixed.
| Work | Typical range |
|---|---|
| Caulking & sealant renewalWindows, doors, trims and control joints | $6 – $12 / linear ft |
| Crack repair (per crack, routed & meshed)Cut out, mesh, base coat and texture match | $120 – $400 each |
| Patch & texture match (small area)Impact holes, small failed sections up to ~20 sq ft | $450 – $1,200 |
| Section rebuild (water damage)Remove to substrate, dry, rebuild base + finish | $18 – $34 / sq ft |
| Full elevation refinishNew base coat, mesh and finish over one wall | $9 – $16 / sq ft |
Anyone quoting a full re-stucco before looking behind the finish is guessing. We open a small test area first so you are paying for what the wall actually needs — see why the cheapest quote usually costs more.
We quote both when both are real options, and tell you which one we would pick on our own house. Related: signs of water damage behind stucco · why GTA winters crack stucco · how stucco repair is done step by step.
We look at the actual walls and tell you what they need — and what they don’t.
System, prep, colour and timeline on paper. No hourly surprises.
Control joints, mesh, flashing and finish coats done the way they should be.
Site left clean, and you sign off on the result before we leave.





















Tell us about your project and get a free, fixed written quote. Oakville-based, serving the whole GTA — open 24 hours.